|
Petrol models
|
|
Volumes of working liquids
|
| Motive oil (including an oil filter), l |
| Engine of 1.3 l |
4.5 |
| Engine of 1.6 l |
3.5 |
| The amount of oil necessary for rise in its level from the mark MIN to mark MOVE of the measuring probe, l |
1.0 |
| Liquid of cooling of the engine, l |
6.0 (approximately) |
| Gearbox oil, l |
2.4 (approximately) |
| Volume of the fuel tank, l |
42 * |
| * Tank volume at carburetor models makes 47 l |
|
Engine
|
| Oil filter: |
| Engine of 1.3 l |
Champion C165 |
| Engine of 1.6 l |
Champion C161 |
| Gaps of valves (engine of 1.3 l), mm |
| Inlet valves |
| steel pushers |
0.20 |
| aluminum pushers |
0.25 |
| Final valves |
0.20 |
|
Cooling system
|
| Type of cooling liquid |
| Manufacturer Velvana Velvary |
Fridex D 824 HS |
| Manufacturer BASF AG |
Glysantin G 05-25 |
| Manufacturer VW |
G 11 V8B |
| Manufacturer Dt. Shell Shemie GmbH |
GIIIysoshell AF |
| Manufacturer DOW Shemosal GmbH |
Antifreeze D 824 HS |
| Manufacturer Dt. BP AG |
Antifreeze H 129 B |
| Manufacturer Hoeshst AG |
Genantin LP 1864/2 |
| Frost resistance: * |
| 40% of antifreeze |
to -25 °C |
| 50% of antifreeze |
to -35 °C |
| 55% of antifreeze |
to -45 °C |
| * The maximum admissible content of antifreeze in mix makes 60%, at the same time frost resistance of liquid to -40 °C is provided. Further increase in concentration of antifreeze in mix leads only to deterioration in parameters |
|
Power supply system
|
| Producer/type |
| AEE engine |
Magneti Marelli |
| Engines 135M, 136M |
Simas 2P |
| Engines 135B, 136B |
Bosch MonoMotronic |
| The filtering air cleaner element: |
| Models of 1.3 l with the central injection (SPFI) |
Champion W222 |
| Models with the distributed injection (MPFI) |
Champion U582 |
| Fuel filter |
Champion L201 |
|
Settings
|
| Turns of idling, rpm: |
| AEE |
640-790 |
| 135M, 136M |
765-815 |
| 135B, 136B |
750-850 |
| Contents WITH |
less than 0.5% |
| Turns of bystry idling, rpm |
2500-2800 |
| Value l on an obor. 2500-2800 rpm |
0.97-1.03 |
| Contents WITH at 2500-2800 rpm |
less than 0.3% |
| Turns during the checking of a contour of adjustment, rpm: |
| AEE |
540-890 |
| 135M, 136M |
665-915 |
| 135B, 136B |
600-1000 |
|
System of ignition
|
| Type of spark plugs and size of an interelectrode gap (mm) |
| Models of 1.3 l: |
| Engine 135 SPFI, Champion RC12YC |
0.8 |
| Engine 136 SPFI, Champion RC9YC |
0.8 |
| MPFI, Champion RN8VTYC4 is not subject to Adjustment |
| * The size of an interelectrode gap is specified proceeding from requirements imposed by Champion. At installation of candles of other producers adhere to recommendations of the last. |
|
Brake mechanisms
|
| Minimum admissible thickness of frictional slips, mm |
| Blocks of forward brake mechanisms |
2.0 |
| Boots of back brake mechanisms |
2.5 |
|
Efforts of tightening of threaded connections
|
Nanometer
|
| Bolts of fastening of the top cover of the air cleaner - model of 1.3 l of SPFI |
10 |
| Traffic jams of discharge of cooling liquid - engines of 1.3 l: |
| Drain stopper of a tube of a cooling path |
20 |
| Drain stopper of the block of cylinders |
25 |
| Bolts of fastening of the coil of ignition |
10 |
| Bolts of fastening of wheels |
110 |
| Nuts of fastening of a cover of a head of cylinders |
3 |
| Spark plugs: |
| With a flat saddle and a sealing washer |
30 |
| With a conical saddle and without sealing washer |
15 |
| Bolt of a fixing plate of the drive of a speedometer |
10 |
| Bolt of fastening of a maslootrazhatelny plate / axis of yokes |
30 |
| Drain stopper of the pallet of a case: |
| Engine of 1.3 l |
65 |
| Engine of 1.6 l |
30 |
| Bolts of fastening of the lower cover of a belt of the GRM drive (are subject to replacement without fail) |
10 |
| Drain stopper of a case of transmission |
35 |
| Lock-nuts of valvate regulators |
18 |
|
Diesel models
|
|
Volumes of working liquids
|
| Motive oil (including an oil filter), l |
5.0 |
| The amount of oil necessary for rise in its level from the mark MIN to mark MOVE of the measuring probe, l |
1.0 |
| Liquid of cooling of the engine, l (approximately) |
6.0 |
| Gearbox oil, l (approximately) |
2.4 |
| Volume of the tank of liquid of washing of glasses, l |
| Models without washers of lenses of head headlights |
3.0 |
| Models with washers of lenses of head headlights |
8.0 |
| Volume of the fuel tank, l |
42 |
|
Engine
|
| Oil filter: |
Champion C125 |
|
Cooling system
|
| Cooling liquid: |
| 50% of antifreeze |
Frost resistance to -37 °C |
| 55% antifreeze |
Frost resistance to -45 °C |
|
|
See also instructions of manufacturers of antifreezes. |
|
|
Power supply system
|
| The filtering air cleaner element: |
| Champion U582 |
| Fuel filter |
Champion L114 |
|
Settings
|
| Turns of idling, rpm |
850-1000 |
| Maximum turns, rpm |
4950-5150 |
|
System of preheat
|
| Type of candles of preheat |
Champion CH160 |
|
Brake mechanisms
|
| Minimum admissible thickness of frictional slips, mm |
| Blocks of forward brake mechanisms |
2.0 |
| Boots of back brake mechanisms |
2.5 |
|
Efforts of tightening of threaded connections
|
Nanometer
|
| Drain stopper of the cooling system |
20 |
| Bolts of fastening of wheels |
110 |
| Bolt of a fixing plate of assembly of the drive of a speedometer |
10 |
| Drain stopper of a case of transmission |
35 |